Maintainance courses query

A forum for aircraft engineers to discuss topics of interest

Moderator: mark

Post Reply
User avatar
Nanolight
Verified User
Verified User
Posts: 602
Joined: Sat Dec 24, 2005 12:57 pm
Location: At a computer Enemy: Gravity
Contact:

Maintainance courses query

Post by Nanolight » Thu Dec 29, 2005 11:37 am

Apologies if this is a silly question, but anyway...

Is is possible to do an aircraft maintaince course in Ireland? I don't mean an apprenticeship, I mean part time, or over a short period of time. I am especially interested in microlights (rotax engines etc.) and thinking about a purchace. I would like to be able to work on it myself. I have a fairly good trechnical knowlege base, but no experience working on aircraft.
Smoke me a kipper, I'll be back for breakfast.

User avatar
Dutch Roll
Unverified User
Unverified User
Posts: 871
Joined: Thu May 13, 2004 8:36 pm
Location: shannon
Contact:

Post by Dutch Roll » Mon Jan 02, 2006 4:55 pm

i would think you now will need a B1 license and add the piston eng. module,its all gone very regulated(heavily).i dont know the scope on the 'part-M ' license which i think is towards GA,find out about this,im sure 1 or 2 members here may be able to help with this side.Thinnk you should look at the commercial side of things because if you go B1/B2 its more aimed at this,because things like ECAM,EICAS,FBW etc must be done.
115 VAC @400Hz

seamus
Unverified User
Unverified User
Posts: 63
Joined: Fri Dec 10, 2004 4:36 pm

Post by seamus » Fri Jan 27, 2006 10:48 am

contact the following they both to courses on the engines
http://www.nmai.ie/ - based in Ireland

http://www.bmaa.org/ - based in the UK


Shey
Thruster T300

User avatar
Nanolight
Verified User
Verified User
Posts: 602
Joined: Sat Dec 24, 2005 12:57 pm
Location: At a computer Enemy: Gravity
Contact:

Post by Nanolight » Wed Feb 01, 2006 3:58 pm

Thanks Shey, will check that out. :wink:
Smoke me a kipper, I'll be back for breakfast.

YoYo
Verified User
Verified User
Posts: 211
Joined: Thu Mar 11, 2004 5:01 pm

Post by YoYo » Fri Feb 03, 2006 7:38 pm

Nanolight

I believe Skydrive, in the UK, run 2 day courses for Rotax engines

ceatach
Verified User
Verified User
Posts: 538
Joined: Mon Apr 05, 2004 3:14 pm

Post by ceatach » Thu May 18, 2006 9:06 am

Dutch Roll wrote:i would think you now will need a B1 license and add the piston eng. module,its all gone very regulated(heavily)


Suppose I want to get an engineers license to maintain the piston engine in my single engine cessna. What do I need to do? Can I do whatever it is, part time? If I did a course like this:
http://www.dit.ie/DIT/study/parttime/courses/dt061.html
and passed the theory exams, what do I need to do after that...

cheers.

User avatar
Dutch Roll
Unverified User
Unverified User
Posts: 871
Joined: Thu May 13, 2004 8:36 pm
Location: shannon
Contact:

Post by Dutch Roll » Thu May 18, 2006 11:00 am

you need to get employment (ie apprenticeship) to go to that in DIT! say if you took an apprenticeship with air atlanta/ryanair you'l be in DIT for your third i think year doing the modules.

however not sure about self-study here in ireland,I know Oxford do it in the UK,and a place called brooklands college.Im also not sure about light aircraft maintenance,maybe someone at kilrush could help ya there on the exact requirements

once you pass the module exams all youl need to do is work for 2/3 years OTJ and youl get the B2/B1 but if your an apprentice youl be on the job in year 2.i wouldnt advise anyone to sit modules without on the job training,i did and what a mistake,after the OTJ a lot of things become much clearer.Im gonna be doing A license and continuing to B2 after.However thats the commercial aviation route.

Theres a few places where you can sit exams if your enrolled in a course,Part-147 approved :

IT Carlow
Shannon aerospace
Air Atlanta (have approval but dont set exams)
DIT
PARC avaition

i know theres one more but i dont remember where.
115 VAC @400Hz

ceatach
Verified User
Verified User
Posts: 538
Joined: Mon Apr 05, 2004 3:14 pm

Post by ceatach » Thu May 18, 2006 2:50 pm

Grand thanks.

Michael Jackson
Unverified User
Unverified User
Posts: 16
Joined: Wed Aug 22, 2007 4:28 pm

Post by Michael Jackson » Fri Mar 21, 2008 9:18 pm

If the Microlight is on a permit to fly, then you can do all the maintenece your self without any previous experience.

If it is on a C of A, then you will need a EASA B1.2 AML
SHAMOON

User avatar
Nanolight
Verified User
Verified User
Posts: 602
Joined: Sat Dec 24, 2005 12:57 pm
Location: At a computer Enemy: Gravity
Contact:

Post by Nanolight » Mon Apr 14, 2008 10:33 pm

Thanks Michael and others, I've since found out a lot more about the way it's done.

Cheers :)
Smoke me a kipper, I'll be back for breakfast.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests